Summary of Contents for Indiana Furniture Square One 17-1
Page 1
Square One Assembly Instructions 8x8x8 17-1 & 17-2 10x10x8 Tools Needed: 6mm Allen Key Ladder 2 to 3 Drill 5mm & 4mm Box Level Tape Driver Bit Installers Allen Keys Measure NOTE: Anchoring to floor or wall may require additional tools and hardware. See note at end of instructions. Components: 17-1 17-2...
Page 2
Square One Assembly Instructions 8x8x8 17-1 & 17-2 10x10x8 80mm bolt Begin by building the configuration 1 block high. To establish the configuration footprint. 60mm bolt Align the holes in blocks and connect with 2, 80mm bolts and 2, 17mm nuts. Fasten the bolt and nut together but do not over tighten because you will want to align and firmly tighten upon final setup.
Page 3
Square One Assembly Instructions 8x8x8 17-1 & 17-2 10x10x8 96” Install the 96” End Caps using the 60mm bolts. Using a ladder and an assistant, install the End Caps and Horizontal Beam Spanners on the top of the unit using the 60mm bolts. The Horizontal Beam Spanners will only have two connection holes at each end.