Table of Contents
Advertisement
6. Insert tube into chamber, close
7.
8. Use 1.0 mL pipet (0354) to add
9. Cap and invert to mix. Wait
10. Insert tube into chamber. Close
NOTE: The meter will remember the last scanned blank reading. It is not
necessary to scan a blank each time the test is performed. To use the
previous blank reading, instead of scanning a new one, scroll to Scan Sample
and proceed. For the most accurate results, the meter should be blanked
1.800.561.8187
lid and select Scan Blank.
Remove tube from colorimeter.
Add 8 drops of Ammonia
Nitrogen Reagent #1 (V-4797).
Cap and mix.
1.0 mL of *Ammonia Nitrogen
Reagent #2 (V-4798).
5 minutes for full color
development. Wipe tube dry.
lid. Select Scan Sample. Record
result as Ammonia-nitrogen.
www.
008 Ammonia-N HR
0.99
ppm
Scan BLank
Scan Sample
12:00:00
001/500
8
information@itm.com
.com
05:00
Advertisement
Table of Contents
