Pumpables GENIE ADVANCED Full Manual page 17

Start your program
To play your pumping program, press
the program button
0 1
00:02
VACUUM
Press the mode button
the program and go back to manual
mode.
Delete your program before recording a new one
Press the program button
minus button for 2 seconds to
delete the stored pump program.
2 sec.
The program icon in the screen flashes
for 2 seconds. while your program plays.
0 1
CYCLE
to end The pump stops when the program is
finished, and the timer starts flashing. If
no buttons are pressed, the pump turns
off after 1 minute.
2 sec.
After deleting your stored program,
and
the program icon will disappear from
the screen.
17
0 1 0 1
00:02
VACUUM CYCLE
0 1 0 1
00:02
VACUUM CYCLE