Page 3
We really encourage you to check out this full manual to get lots more information. We've included information on suggested pump routines, troubleshooting, cleaning and sterilising and lots more to give you a good grounding in using your breast pump.
Full Manual Getting Help What’s In The Box Intended Use & Safety Get To Know Your Genie Plus Getting Started Sterilising Your Kit Charging Your Pump Assembling Your Kit Understanding The Controls Programs Replacing Parts Technical Specification Warranty...
Working out using a breast pump and breastfeeding while you care for a newborn is hard work and you don't need to do it alone. You are very welcome as part of the Pumpables community. If you need help, please get in touch.
We’ll guide you through getting to know your Genie Plus later in this manual, but for now, here’s a list of everything that’s included with your pump. Pump unit Charger Connector Tubing Breastshield 21mm / 24mm / 27mm Backflow Protector Backflow Protector...
Genie Plus Double Electric Breast Pump is a portable breast pump to help lactating women express and collect milk. The Genie Plus is a closed system breast The power adaptor is a part of the breast pump. Your milk collection kit should not be pump.
Mode with three speed levels to keep the milkflow going Power On / Off Button Genie Plus is plugged into power Turn Genie Plus on to start pumping Battery Mode Button Up to 2.5 hours of battery life Swap between Expression mode...
Page 9
Prevents milk from backflowing down tubing, protecting the motor and tubing from moisture Connector Connects the breastshield and backflow protector to the bottle Bottle Pumpables wide-neck bottle Duck Valve This part helps create a vacuum. It’s fragile, handle it carefully!
start using your You can use the pump while charging. pump right away out of the box. Once it's time recharge, charging time approximately 90 minutes. CLICK When assembling the adaptor, Plug into pump. make sure it clicks into place. Fully charged 75-100% (third bar blinking) 50-75%...
Page 14
Fit the stem of the bottom piece of Now you can connect the tubing to the backflow protector into the piece backflow connector. protector and to the Genie Plus. Don’t forget to cover the unused airport if you’re single pumping!
Understanding the controls Start Genie Plus Switch between modes 00:08 Press to turn on Genie Plus Press to swap between and start pumping Expression and Massage mode Change vacuum level 00:10 00:10 Increase the vacuum level with and decrease it with...
Page 16
Change Cycle Speed in Expression Mode cy:08 cy:08 In expression mode, you can choose Hold the + button for 1 sec. and the one of three cycle speeds for each speed will appear on the screen. Press vacuum level. and hold the + button again for 1 sec. to increase the speed for the current vacuum level.
Start Your Program 01:07 To play your pumping program, press the - button (the same button you press to decrease vacuum intensity) for 2 seconds. Erase Your Program 01:24 01:24 Press the Mode button for 2 seconds to delete the stored pump program. After deleting your stored program, the Memory icon will disappear from the screen.
Replacing parts Some parts of your kit need replacing regularly, depending on how often you pump. This is important! Worn out parts are the most common reason for a decrease in output. Here’s an overview of what to replace when: Occasional pumping Exclusive pumping i.e.
Vacuum Range 20 - 300 mmHg Cycle Speed (Expression Mode) 24 - 70 CPM (variable) Cycle Speed (Massage Mode) 71 CPM Net Weight 220 g (0.49 lbs) Warranty 2 Years Battery Life 2.5 Hours Time to Charge 1.5 Hours Motor Life 350 Hours Country of Origin South Korea...
Need help?
Do you have a question about the Genie Plus and is the answer not in the manual?
Questions and answers