Advertisement
Hamptons Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
C
A
B
bolt
locking
dowel
x12
nut x12
x20
F
G
shelf
long
cover
plug x2
screw x 2
K
L
screw
hinge
x24
x 4
Hardware Supplied
Phillips & Flathead screwdrivers and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
mocka.co.nz | mocka.com.au
D
E
stopper
long screw
x8
x2
H
I
J
long
handle
screw x 5
x 4
x 2
P
1
wedge
x12
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
1
Advertisement
Table of Contents
Related Manuals for Mocka Hamptons Entertainment Unit
Summary of Contents for Mocka Hamptons Entertainment Unit
- Page 1 Hamptons Entertainment Unit Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. bolt locking dowel stopper long screw nut x12 shelf long cover long handle plug x2 screw x 5 screw x 2 screw...
- Page 2 Hamptons Entertainment Unit Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. Insert 8 x bolt (A) into panels [1] .Attach 5 x screw (J) into panel [6] and[1]. Tighten with a screwdriver. Attach 4 x bolt (A) into panel [5] and[7].
- Page 3 Hamptons Entertainment Unit Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. Insert 4 x dowel (C) into panel [8]. Attach panel [8] to panels [5] and [7],[5] and Insert 8 x dowel (C) into panel [1]. Attach panel [1] to panels [3] and [4],[5] and[7] and secure with 8 x locking nuts (B).
- Page 4 Hamptons Entertainment Unit Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. Attach panel [2] to panel [3] and [4] and [5] and [7] with 8 x long screws (D). Attach centre support 2 xshekf plug (G) to panel [2]. Attach 2 x long screw Slide panel [9] and [10] between the grooves on panels [3],[4] and [5] and (F) to centre support (G) asshown.
- Page 5 Hamptons Entertainment Unit Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. Drawers (x2) Attach 4x hinge (K) to panel [12] and secure with 8 x small screw (L). Insert 2 x bolts (I) into panel [12] .
- Page 6 Hamptons Entertainment Unit Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. NOTE: If the doors are uneven or there is a gap in the middle, loosen or tighten the screw on the hinge until Attach panel [11] to panel as shown.
Need help?
Do you have a question about the Hamptons Entertainment Unit and is the answer not in the manual?
Questions and answers