Appliance Details; What Is Supplied; What May Be Needed For Installation - Everdure RBES622 Installation, Operation & Maintenance Instructions Manual

APPLIANCE DETAILS

General Information
Before installing and operating the rangehood, carefully read the following
important information regarding installation safety and maintenance. Keep
this information booklet accessible for further consultations. The appliance
has been designed to exhaust cooking fumes externally, or it may be used
as a re-circulating rangehood (Filters required for recirculating type).
Before installation, please ensure that the following have been supplied
and that the tools listed below are readily available.

WHAT IS SUPPLIED

•
Rangehood (including plug (re-circulating) and one way valve
(flued)) x 1
•
Installation kit (bolt x 4, washer x 8, screw x 4, nut x 4, plastic wall plug x 4) x 1
•
Instruction booklet x 1
NOTE: Parts needed for the ducted option must be purchased separately.

WHAT MAY BE NEEDED FOR INSTALLATION

Electric Drill
Tape Measure
Spirit Level
Screwdrivers
2
RBES622 and RBES62B2
Voltage: 220-240V ~50Hz
Lamp Max: 1 x 2W LED
Rated Input Power: 202W
Duct Tape
Jig Saw
Ladder
Torch (if natural lighting is minimal)
EASY DECISION