Advertisement
Table of Contents
- 1 Table of Contents
- 2 Important Safety Instructions
- 3 Appliance Details
- 4 General Information
- 5 What Is Supplied
- 6 What May be Needed for Installation
- 7 Installation Instructions
- 8 Operating Instructions
- 9 Cleaning
- 10 Replacing the Bulbs
- 11 Troubleshooting
- Download this manual
See also:
Instruction and Installation Manual
Advertisement
Table of Contents
Related Manuals for Everdure RBES63
Summary of Contents for Everdure RBES63
- Page 1 INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR EVERDURE RANGE HOOD Models Included: RBES63 RBES64 RBES65 RBES91 RBES92 RBES96 DESIGNED TO PERFECTION...
-
Page 2: Table Of Contents
It is important that you retain these instructions, proof of purchase as well as other important documents about this product for future reference. Due to continual product development, Everdure reserves the right to alter specifications or appearances without notice. Dispose of packaging responsibly – recycle where facilities are available. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. In certain circumstances electrical appliances may be a danger hazard. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. -
Page 4: Appliance Details
WHAT IS SUPPLIED Range hood (including one way valve for flue x 1) x 1. Installation kit x 1 – RBES63, RBES65, RBES91 & RBES96: 8mm bolts x 10, 30mm screws x 2, 40mm screws x 7, plastic plugs x 9. - Page 5 INSTALLATION OF THE EVERDURE RBES63, RBES65, RBES91 & RBES96 RANGE HOODS DIRECTLY TO A WALL Ensure that the wall is structurally sound, and is capable of carrying the weight of the range hood. The range hood can be placed at a minimum of 600mm away from an electric cooktop, or 650mm minimum from a gas cooktop.
- Page 6 INSTALLATION OF THE EVERDURE RBES64 & RBES92 RANGE HOODS DIRECTLY TO A WALL Ensure that the wall is structurally sound, and is capable of carrying the weight of the range hood. The range hood can be placed at a minimum of 600mm away from an electric cooktop, or 650mm minimum from a gas cooktop.
-
Page 7: Operating Instructions
NOTE: Care should be taken that the range hood is fitted correctly (see diagram below). Incorrect installation can cause a build up of grease and oils and cause damage to the unit. NOTE: Remove all protective plastic coatings from the stainless steel surfaces before use. OPERATING INSTRUCTIONS Note: Before the unit can be operated, it must be ducted. - Page 8 FOR RBES63, RBES64, RBES65, RBES91 & RBES96 PUSH BUTTON OPERATED RANGEHOODS The range hood has indication diagrams to allow you to easily select the fan operating speed required. Push the low button, indicated by a fan with 3 blades, and the motor will run at a low speed.
-
Page 9: Cleaning
Cleaning of the range hood must be performed as described above, otherwise there is a possibility of a fire hazard due to grease and fat build up. REPLACING THE BULBS MODELS RBES63 & RBES91 1. Switch the unit off and disconnect from mains power first. 2. Remove the light chrome rims by turning in anti-clockwise direction. -
Page 10: Troubleshooting
TROUBLESHOOTING Fault Possible Cause Solution Fan switch turned off Select a fan switch position. Light on, but Fan switch failed Contact Everdure Service. motor does Motor failed Contact Everdure Service. not work House fuses blown Reset/Replace fuses. Light does not Power cord loose or disconnected Refit cord to power outlet. - Page 11 DESIGNED TO PERFECTION...
- Page 12 104 Vanessa St Kingsgrove NSW 2208 In Australia: 1300 355 541 In New Zealand: (09) 414 5755 www.everdure.com IM Ref: RBES63 21/2014/02FC F O R I N D O O R U S E O N L Y DESIGNED TO PERFECTION...
Need help?
Do you have a question about the RBES63 and is the answer not in the manual?
Questions and answers
need whole replacement for rangehood lights 1.5w globe not led as doesnt seem to be compatable
The replacement for the Everdure RBES63 rangehood lights is a 12V G4 base 20W halogen light bulb.
This answer is automatically generated