Advertisement
READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY.
KEEP OUT OF REACH OF CHILDREN. WARNING: This product contains small parts that may be a choking hazard to
small children.
• After unpacking all components, assemble band saw on a fi rm level surface to prevent saw from tilting or rocking.
• Be sure the power switch is in the OFF position before plugging in the band saw.
• Always disconnect band saw from electrical outlet before setting up or servicing.
• Use a properly grounded and tested outlet. Under no circumstances should you ever modify the plug.
• Wear proper apparel. Never wear loose fi tting clothes, neckties, jewelry and gloves that may get caught in the saws
moving parts.
• Remove all wrenches from the work surface before using band saw. Leaving wrenches attached while operating this tool
may result in damage to the machine and/or injury to the operator.
• Always wear safety glasses. Everyday eyeglasses have only impact resistant lenses; they are not safety glasses.
• Wear dust mask when cutting with wood or metal blade.
• Never turn on band saw while glass or working materials are touching the blade.
• Always hold material being cut fi rmly against cutting table.
• Feed materials at a slow easy pace into the blade. Avoid sudden twisting of the blade; which may cause kinking
or breaking.
• Never leave saw running unattended. Turn power OFF when not in use.
• Do not operate while under the infl uence of medication or alcohol.
• To ensure top performance keep band saw properly maintained.
WARNING: Dust created during sawing, grinding or other construction activities may contain chemicals know in to the
State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemical are:
• Lead from lead-based paint or came
• Crystalline silica from bricks, cement and othermasonary products.
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area and work with approved safety equipment such as dust masks rated to fi lter
our microscopic particles.
Your PRECISION 2000™ has been shipped partially assembled. Carefully remove saw and parts from their packaging.
1 - Band Saw Body with Water Bottle and
Lower Wheel Reservoir
2 - Cutting Table
3 - Miter Gauge
4 – Electrical Cord
5 - Adjusting Wrenches
6 – Studio Pro™ Diamond Blade
7 – The "Chopper" Wood Blade
8 - Additional Blade Guide
9 - Drain Tubing
PRECISION 2000™ DELUXE ALSO INCLUDES
10 - Rubber Tubing
11 - Multispeed Rheostat
12 - Adjustable Recirculating Water Pump
13 - Reservoir Tray
11
BEFORE YOU BEGIN
CONTENTS
12
10
7
8
6
9
4
13
5
1
3
2
Advertisement
