Advertisement
DL7000 INSTRUCTION MANUAL
Before You Begin
Read and follow all instructions carefully.
•
Be sure the power switch is in the OFF position before plugging in this tool.
•
Wear proper apparel. Never wear loose clothing, gloves, neckties or jewelry. These articles may become caught in the
saw's moving parts.
•
Always hold material being cut
work material.
•
Never turn on machine with tools or materials near or touching the blade.
•
Keep children away from this tool and all power tools.
•
Never leave saw running unattended. Turn power OFF and unplug it from the outlet when not in use.
•
ALWAYS WEAR SAFETY GLASSES.
•
Feed work material forward at a slow easy pace into the blade. Avoid sudden twisting of the blade; which may cause
kinking or breaking.
•
After unpacking all components, assemble band saw on a
•
Always disconnect band saw from electrical outlet before setting up or servicing.
•
Remove all wrenches before using band saw. Leaving wrenches attached while operating this tool may result in
damage to the machine and/or operator.
•
Do not operate while under the
•
To ensure top performance keep band saw properly maintained.
Contents
Your Diamond Laser 7000
Carefully remove saw and parts from the packaging.
1-Band Saw Body
2-Cutting Table
3-Recirculating Water Pump
4-Detachable Water Reservoir
5-Hex Wrenches
6-Cresent Wrench
7-Manual
DL7000 Blade Installed on Machine
against cutting table. Adjust the upper Blade Guide so it is
Everyday eyeglasses are not safety glasses.
of medication or alcohol.
has been shipped partially assembled.
™
- PAGE 1
level surface to prevent saw from tilting and rocking.
to
1
4
5
6
7
from the
2
3
Advertisement
