Advertisement
RAISED INSTALLATION -
Parts Supplied:
11x
1
Turn the tray over and use the cardboard packaging as a
protective mat. Note the circles that have been marked to
indicate feet position. The symbol
should fix the feet with the panel fixing rod.
3
Assemble the panel fixing rods to the feet.
5
a: Ensure the panel fixing rod is located at 90° to the
edge of the tray as shown above.
b: Ensure the face of the panel fixing rod is lined up with
outside edge of the tray as shown above.
3
Panel Pack 5
M4*14mm
44x
indicates where you
3x
a
b
4x
Leg fixing hole (non reinforced):
2
Drill Ø3.5 x 5mm MAX deep.
Reinforced Area :
Holes in this area
drill Ø3.5 x 13/18mm deep.
4
M4*14mm
Screw feet to underside of tray & fit fixing rods to suit the
number & position of panels being used.
6
When all of the feet have been fitted, the feet in the
corner positions should be adjusted to 100mm.
3 - 4
1x
Ø3.5mm
D
Advertisement
