Advertisement
ON FLOOR INSTALLATION
5
Place shower tray in position with tray edges upto &
parallel to walls.
Apply gentle pressure with the palms of the hands & small
side to side motions to ensure tray is fully supported on it's
bed.
7
When shower tray is set remove the remainder of the
protective plastic film and connect the waste pipe.
9
Seal tray edges to walls with anti fungal silicone sealant &
allow to cure.
2
6
Level the tray and allow to set.
8
Spray some water, check for leakage and water drainage.
10
Tile & seal tray edges to walls with anti fungal silicone
sealant & allow to cure.
2 - 4
water
D
Advertisement
