Structure - Daewoo DW-3000 Series Training Manual

9-2. Structure

1) Clutch lever Tip have to be overlapped in Clutch boss 3 - 5mm when washing.
2) C-L Tip have to be seperated to the Clutch boss after Drain valve motor pull the Brake lever.
3) Control bolt contacts to the Brake lever smoothly.
4) At the beginning of spin, if pulsator was driven instead of tub -> Clutch spring couldn't fasten the
shaft. Change clutch spring.
Pulsator shaft
Spin shaft
Gear unit
Braker lever
Control bolt
Clutch lever
C-L Tip
Clutch boss
Clutch spring
Braker
63