Safety Instructions; Appropriate Use - OMEGA AIR EMD Series Installation And Operating Manual

EMD Installation and operating manual

Safety instructions

Installation and maintenance work may only be carried out when the device is not

under pressure. To depressurize the device, close ball valve and press the test button
on device until pressure in it drops.
Installation and maintenance work may only be carried out by trained and

experienced personnel.
Installation and maintenance workers must use proper safety / protection equipment

(e.g. protection gloves, protection goggles, ...)
Disconnect electrical power supply before opening the top cover of the device.

Installation and maintenance work may only be carried out when electrical power

supply is disconnected.
Electrical work must always be carried out by qualified electrician.

Do not exceed maximal operating pressure or operating temperature range (see data

label).
Do not use the device in hazardous areas with potentially explosive atmospheres.

Use original spare parts only.

Use the device for the appropriate purpose only.


Appropriate use

EMD series electronic condensate drains are intended exclusively for the following purpose:
Draining condensate from compressed air system (air compressors, air

receivers/pressure vessels, air dryers and air filters).
Any other form of use or one going beyond this shall be considered as inappropriate. We
shall have no liability whatsoever for any damage incurred as a result.
www.omega-air.si 13