Switching Your Unit On/Off; Using Your Spirit; Pairing Your Unit To Bluetooth Devices - Cardo Systems SPIRIT Manual

2.3 SWITCHING YOUR UNIT ON/OFF

To switch your SPIRIT on:
Press both and
●
The speaker plays an ascending tone and a voice message greets you.
The LED confirms your SPIRIT is on:
Normal and low battery — LED flashes blue three times.
●
Charging — LED flashes red.
●
To switch your SPIRIT off:
Press both and
●
The LED flashes red three times, confirming that your unit is switching off. The speaker plays a descending
tone and a voice message, "Goodbye".

2.4 USING YOUR SPIRIT

You can operate the various features of your SPIRIT in the following ways:
Press a button or combination of buttons on the unit
●
Use the Cardo Connect App on your mobile device (once it is paired with the unit)
●

2.5 PAIRING YOUR UNIT TO BLUETOOTH DEVICES

Your SPIRIT has two Bluetooth channels for connection to Bluetooth devices such as mobile phones, GPS devices,
and Bluetooth music players with A2DP.
To connect your unit to a Bluetooth device, you must first pair them. Once paired, they automatically recognize
each other whenever they are within range.
If you are pairing more than one device, Cardo recommends that you pair the mobile phone to channel 1,
●
and the additional device (such as GPS, music player or additional mobile phone) to channel 2.
If you are pairing the unit to more than one mobile phone, the phone paired with channel 1 is the default
●
phone for outgoing calls.
for 2 seconds.
.
5