Riding With Others; Bluetooth Intercom; Setting Up Bluetooth Intercom Connection - Cardo Systems SPIRIT Manual

5. RIDING WITH OTHERS

Your SPIRIT features the traditional Bluetooth protocol intercom communication mode.

5.1 BLUETOOTH INTERCOM

To connect your unit to another unit with a Bluetooth intercom, such as a Cardo Bluetooth unit or other Bluetooth-
enabled devices, you must first pair their channels. Once paired, the unit automatically recognizes the other one
whenever they are in range (line of sight up to 400m / 0.25mi subject to terrain).
Pairing a channel replaces any existing paired unit on that channel with the new unit.
●
If you purchased the SPIRIT DUO, the retail package contains two pre-paired units.
●
The Intercom range with other models is limited to the distance of the unit with the shorter range.
●

5.1.1 SETTING UP BLUETOOTH INTERCOM CONNECTION

To set up a Bluetooth connection:
1. Confirm your unit is in Standby mode (LED flashes slowly).
2. To initiate 2-way pairing:
On your unit, press
●
The LED flashes red.
●
The following announcement is heard: Rider A pairing.
●
Bluetooth intercom pairing needs to be initiated on the other device.
●
To cancel the pairing process, press
●
If pairing is not completed within 2 minutes, the unit automatically returns to Standby.
●
To pair a non-Cardo Bluetooth intercom unit:
The non-Cardo unit should be on phone pairing mode.
●
All the steps are the same as with a Cardo Bluetooth intercom group.
●
for 5 seconds to enter pairing mode.
for 2 seconds. The LED stops flashing.
13