Personalizing Your Device; Using Parallel Audio Streaming - Cardo Systems SPIRIT Manual

7. PERSONALIZING YOUR DEVICE

Get the most out of your SPIRIT by changing the settings and customizing your unit according to your own
personal preferences, using either of the following methods:
Cardo Connect App on iOS or Android devices.
●
Unit buttons.
●
Cardo recommends you customize your settings before going out on the road. You can adjust any of these
●
settings as required after experiencing them under road conditions.
Object
Default Value
AGC sensitivity Medium
(Off/Low/Medium/High)
Audio priority Bluetooth
(A2DP/Bluetooth intercom
intercom)
Background Audio Level N/A
Bluetooth friendly name SPIRIT
Create, join or leave a Empty
group of
passengers/riders
Language According to
Your Region
Mobile priority Mobile 1
Parallel audio streaming Disable
in Bluetooth mode
(Enable/Disable)
Set speed dial numbers Empty
Spoken Status Enable
Announcements
(Enable/Disable)
AGC and voice control performance vary based on environmental conditions, including riding speed,
●
helmet type and ambient noise. For improved voice control performance, minimize the wind impact on the
microphone by closing the visor and using the large microphone sponge.

7.1 USING PARALLEL AUDIO STREAMING

With parallel audio streaming, you can hear GPS instructions during a mobile or Bluetooth intercom call, or while
listening to other audio sources, such as music.
Description
AGC automatically adjusts speaker volume according to
ambient noise and riding speed. For example, when set
to Low, higher ambient noise will cause the volume
increase to kick in at a higher level.
Priority of audio source playing through speakers. Either
music is not interrupted by an intercom call, or vice-
versa.
Sets the background audio volume when parallel audio
streaming is on (see Parallel audio streaming in
Bluetooth mode (Enable/Disable)
Sets the name that appears on your phone while pairing
and in the Cardo app.
DMC intercom groups. For more information, see
"Creating Groups for DMC Intercom" on page 1.
Voice announcements and voice-assisted menus
language (see "Spoken Status Announcements" below).
If you paired your unit to two mobile phones, you must
set one of them as the default phone for outgoing calls.
You can hear two audio sources simultaneously. For
example, hear GPS while listening to music.
Note: Parallel audio streaming may not work properly
with some iOS devices (i.e., music player or GPS
navigator) due to connected device limitations.
Pre-set phone numbers for automatic dialing.
Voice announcements inform you to whom or to what
device you are connected.
16
below).
Cardo Connect App
(iOS/Android)
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü