Table of Contents
Advertisement
3. GETTING STARTED
3.1 GETTING TO KNOW YOUR FREECOM 1
3.2 SWITCHING YOUR UNIT ON/OFF
To switch your FREECOM 1 on:
Press
and
for 1 second. The speaker plays an ascending tone and a voice message "Hello
●
FREECOM 1".
In all battery states, the LED flashes blue three times repeatedly, confirming that your FREECOM 1 is on.
To switch your FREECOM 1 off:
Tap
and
.
●
In all battery states, the LED flashes red three times repeatedly, confirming that your FREECOM 1 is
switching off. The speaker plays a descending tone and a voice message "Goodbye".
Connecting your unit to a charger switches off the unit.
3.3 OPERATING YOUR FREECOM 1
You can operate the various features by pressing a button or combination of buttons on the unit.
LEDs, tones and voice announcements guide you while using the functions of your FREECOM 1, as described in
FREECOM 1 Modes and Events - LED Indications
This manual describes the most suitable method or methods to operate each feature.
3.4 BASIC FUNCTIONS
To turn the volume up for current audio source:
Tap
.
●
With each tap, a louder tone is played on the speaker until you reach the maximum volume, as indicated by
the maximum volume tone.
To turn the volume down for current audio source:
Tap
.
●
With each tap, a quieter tone is played on the speaker until you reach the minimum volume, as indicated by
the minimum volume tone.
on page 18.
6
Advertisement
Table of Contents
Need help?
Do you have a question about the Freecom 1 and is the answer not in the manual?
Questions and answers