Personalizing Your Device - Cardo Systems Freecom 4x Manual

7. PERSONALIZING YOUR DEVICE

Get the most out of your FREECOM 2x by changing the settings and customizing your unit according to your own
personal preferences, using either of the following methods:
Cardo Connect App on iOS or Android devices.
●
Unit buttons.
●
Cardo recommends you customize your settings before going out on the road. You can adjust any of these
●
settings as required after experiencing them under road conditions.
Object
AGC sensitivity Medium
(Off/Low/Medium/High)
Audio priority Bluetooth
(A2DP/Bluetooth intercom
intercom)
Background Audio Level N/A
Bluetooth friendly name FREECOM 2x
Create, join or leave a Empty
group of
passengers/riders
FM Band According to
Your Region
Language According to
Your Region
Mobile priority Mobile 1
Parallel audio streaming Disable
in Bluetooth mode
(Enable/Disable)
RDS (Enable/Disable) Disable
Set speed dial numbers Empty
Set the 6 FM radio 107.5
presets
Spoken Status Enable
Announcements
(Enable/Disable)
Default Value
AGC automatically adjusts speaker volume according to
ambient noise and riding speed. For example, when set
to Low, higher ambient noise will cause the volume
increase to kick in at a higher level.
Priority of audio source playing through speakers. Either
music is not interrupted by an intercom call, or vice-
versa.
Sets the background audio volume when parallel audio
streaming is on (see
Bluetooth mode (Enable/Disable)
Sets the name that appears on your phone while pairing
and in the Cardo app.
DMC intercom groups. For more information, see
"Creating Groups for DMC Intercom" on page 1.
If you are in Japan, select Japan. Otherwise, select
Worldwide.
Voice announcements and voice-assisted menus
language (see "Spoken Status Announcements" below).
If you paired your unit to two mobile phones, you must
set one of them as the default phone for outgoing calls.
You can hear two audio sources simultaneously. For
example, hear GPS while listening to music.
Note: Parallel audio streaming may not work properly
with some iOS devices (i.e., music player or GPS
navigator) due to connected device limitations.
Radio Data System allows the radio to automatically
retune to the strongest frequency available for the FM
station you are listening to when the signal becomes
too weak.
Pre-set phone numbers for automatic dialing.
Pre-set FM radio stations.
Voice announcements inform you to whom or to what
device you are connected.
Description
Parallel audio streaming in
below).
20
Cardo Connect App
(iOS/Android)
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü