Installation - Dual USER MANUAL Installation & Owner's Manual

XD6200
Preparation
Please read entire manual before installation.
Before You Start
• Disconnect negative battery terminal.
(consult a qualified technician for instructions)
• Avoid installing the unit where it would be subject to high temperatures,
such as from direct sunlight, or where it would be subject to dust, dirt or
excessive vibration.
Getting Started
• Remove 2 transit screws located on
top of the unit.
• Insert the supplied keys into the
slots as shown, and slide the unit
out of the mounting sleeve.
• Install mounting sleeve into dash
opening, bending tabs to secure.
• Certain vehicles may require an
installation kit and/or wiring
harness adapter (sold separately).
2

INSTALLATION

KEYS
SECURITY
LED
RESET
BUTTON