SAFETY & WARNINGS Ensure to read all instructions and warnings in this user guide prior to assembly. Retain this user guide for future reference. • Ensure no parts are missing. • Lay out all the components on a soft surface. •...
Page 4
COMPONENTS Parts list Dimensions (mm) 675 x 356 x 50 1810 x 360 x 50...
Page 5
Hardware A (x4) B Ø17 x 8 x 2mm (x4) C M8 x 14 x 5mm (x4) D M8 x 70mm (x4) E (x1) F (x4) G 10 x 50mm (x4)
Page 6
ASSEMBLY Step 1: Insert D onto part 2 as shown below. This creates the top assembly. D M8x70mm (x4)
Page 7
Step 2: Insert G onto both parts labelled 1. This will create two support assemblies. G 10x50mm (x4)
Page 8
Step 3: Insert the support assemblies onto the top assembly. This will result in D attached in step 1 to protrude out of the two holes on each support assembly. Inside one hole of a support assembly, place A, B and C over D. Secure C with the E wrench, then cover the hole with F.
Page 12
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...
Need help?
Do you have a question about the OVCAMCDLGWA and is the answer not in the manual?
Questions and answers