Dell Inspiron 13 5310 Service Manual page 45
Hide thumbs
Also See for Inspiron 13 5310:
- Setup and specifications (22 pages) ,
- Quick start manual (14 pages)
Table of Contents
Advertisement
Steps
1. Place the heat sink on the system board.
NOTE:
The number of screws varies depending on the configuration ordered.
2. In sequential order (1>2>3>4>5>6>7) tighten the seven captive screws (M2x2) that secure the heat sink to the system
board.
Next steps
1. Install the
base
cover.
2. Exit
Service
Mode.
3. Follow the procedure in
After working inside your
computer.
Removing and installing components
45
Advertisement
Table of Contents
