Product Identification - Machine Orientation - Case CX260C Service Manual

INTRODUCTION

Product identification - Machine orientation

The terms "Right-hand", "Left-hand", "Front" and "Rear"
are used in this manual to indicate the sides as they are
seen from the operator's seat when the cab is over the
idler wheels.
NOTICE: the illustration opposite shows the machine in
normal travel position. In normal travel position, the cab
is over the idler wheels. The travel reduction gears are at
the rear of the upperstructure.
(A) Front
(B) Rear
(C) Right-hand side
(D) Left-hand side
(E) Travel motors
(F) Idler wheels
1
726B3831
47877014 01/07/2015
52