Table of Contents
Advertisement
Oil Grade
1.
Mineral oil
2.
Semi-synthetic oil
Fuel
The fuel must conform to Interim Tier 4/Stage 3B Exhaust Gas Control Regulations.
Use grade number 2-D (S15) fuel.
Using other types of fuel may lead to stalled engine output or deterioration in fuel economy.
During cold weather [lower than -7 °C (19.4 °F)], it is temporarily acceptable to use a mixture of No. 1-D (S15) and
No. 2-D (S15).
Consult the fuel supplier or the CASE CONSTRUCTION Dealer.
If the temperature drops below the fuel cloud point, output deficiency or engine start problems may occur due to wax
crystals.
Conditions applicable to diesel fuel
The diesel fuel used must:
• Be free from dust particles, even minute ones.
• Have the proper viscosity.
• Have a high cetane number.
• Present great fluidity at low temperatures.
• Have low sulphur content.
• Have very little residual carbon.
INTRODUCTION
1
SMIL13CEX5633FA
3.
Synthetic oil
47877014 01/07/2015
44
Advertisement
Table of Contents
