4.
If the issue persists, contact H3C Support.
Related commands
This section lists the commands that you might use for troubleshooting Layer 3 forwarding failure.
Command
debugging arp packet
display arp
display ip routing-table
display mac - address
display fib
Protocol flapping
Symptom
The switch cannot send or receive protocol packets.
Troubleshooting flowchart
Figure 9 Troubleshooting protocol flapping
Layer 3 protocol flapping
Layer 2 packet loss occurs?
Layer 3 packet loss occurs?
Software-related
packet loss occurs?
No
Contact H3C Support
Solution
To resolve the issue:
Yes
No
Yes
No
Yes
Description
Enables ARP packet debugging.
Displays ARP entries.
Displays brief information about active routes in the routing
table.
Display MAC address entries
Display FIB entries
Troubleshoot the
problem
Troubleshoot the
problem
Collect diagnostic
information
26
Yes
Resolved?
No
Yes
Resolved?
No
End