Sample Method - Altronics PerformAire Eclipse Manual

SAMPLE METHOD

By pressing "9" you will the following will be displayed.
Auto Stable
Continual Samp=2
Selecting either option determines the function of the SAMPLE AIR.
Auto Stable: (recommended)
This mode allows the unit to automatically show weather readings when
the unit has properly stabilized. When SAMPLE AIR is selected
following will be displayed:
Stabilizing XX%
When stabilizing reaches 100% the weather readings will be displayed.
After selecting Auto Stable you will have the option to Set Stabilizing.
This allows you to set the degree of stabilizing. The lower the number
the more amount of stabilizing and the more accurate the air sample. A
value of 3 or 4 is suggested unless conditions are very windy. Windy
conditions cause greater temperature variations and may require you to
set the stabilizing to a higher number in order to reach 100% stabilized.
If unit is taking a long time to reach 100% you can also press and hold
the MENU key and weather data will be displayed.
Set Stabilizing
PRESS 1=Y 2=N
Selecting Yes:
Continual Sample:
This mode allows the unit to continually update the weather readings
every few seconds and keeps fan running when in SAMPLE AIR.
=1
Enter value
(1-10)->
23