Normal Bake; Oven Calibration - Frigidaire FEB24S2ASC Service Data Sheet

Gas & electric ovens with electronic oven control

Table of Contents

Available languages

ES100 ELECTRONIC OVEN CONTROL

Note: The ES100's are not field repairable.

Note: Depending on model, the size and shape of touch pads may vary (for example round instead of elliptical).

NORMAL BAKE

Electric Models: During a normal bake mode, the control preheats the oven by alternate bake & broil elements.

When the desired temperature is reached, the control adds top heat by cycling the broil element on for approx. 5

seconds per minute. The bake element is on for the remaining time of the minute. Both elements use full power

when they are on but they are never on at the same time.

Gas Models: Only the bake element is used all the time.

FIRST RISE

It is normal to see a temperature overshoot in the

first rise of all modes when you monitor the temperature.

Set the electronic oven control for normal baking at 350°F. Obtain an average oven temperature after a minimum

of 5 cycles.

The oven calibration can be modified using the oven control display. Please refer to the Owner's Guide manual.

Note: Changing calibration affects all the cooking modes but not the clean and the broil modes.

t (sec)

First rise overshoot

Set point

Table of Contents