Download  Print this page

Frigidaire FEB24S2AS Service Data Sheet

Gas & electric wall ovens with electronic oven control.
Hide thumbs
   

Advertisement

SERVICE DATA SHEET
Gas & Electric Wall Ovens with Electronic Oven Control (ES 100)
NOTICE
This service data sheet is intended for use by persons having electrical and mechanical training and a level of
knowledge of these subjects generally considered acceptable in the appliance repair trade. The manufacturer
cannot be responsible, nor assume any liability, for injury or damage of any kind arising from the use of
this data sheet.
SAFE SERVICING PRACTICES
To avoid the possibility of personal injury and/or property damage, it is important that safe servicing practices be
observed. The following are some limited examples of safe practices.
1. Do not attempt a product repair if you have any doubts as to your ability to complete it in a safe and satisfactory
manner.
2. Before servicing or moving an appliance, remove power cord from electric outlet, trip circuit
breaker to Off, or remove fuse.
3. Never interfere with the proper installation of any safety device.
4. USE ONLY REPLACEMENT PARTS CATALOGED FOR THIS APPLIANCE. SUBSTITUTIONS MAY DEFEAT COMPLIANCE
WITH SAFETY STANDARDS SET FOR HOME APPLIANCES.
5. GROUNDING: The standard color coding for safety ground wires is GREEN OR GREEN WITH YELLOW STRIPES.
Ground leads are not to be used as current carrying conductors. IT IS EXTREMELY IMPORTANT THAT THE SERVICE
TECHNICIAN REESTABLISH ALL SAFETY GROUNDS PRIOR TO COMPLETION OF SERVICE. FAILURE TO DO SO
WILL CREATE A POTENTIAL HAZARD.
6. Prior to returning the product to service, ensure that:
All electric and gas connections are correct and secure.
All gas connections are tested for leaks. DO NOT TEST FOR GAS LEAKS WITH A FLAME.
All electrical leads are properly dressed and secured away from sharp edges, high-temperature components,
and moving parts.
All uninsulated electrical terminals, connectors, heaters, etc. are adequately spaced away from all metal
parts and panels.
All safety grounds (both internal and external) are correctly and securely reassembled.
All panels are properly and securely reassembled.
318047409 (0203) Rev. B
1

Advertisement

   Related Manuals for Frigidaire FEB24S2AS

   Summary of Contents for Frigidaire FEB24S2AS

  • Page 1 SERVICE DATA SHEET Gas & Electric Wall Ovens with Electronic Oven Control (ES 100) NOTICE This service data sheet is intended for use by persons having electrical and mechanical training and a level of knowledge of these subjects generally considered acceptable in the appliance repair trade. The manufacturer cannot be responsible, nor assume any liability, for injury or damage of any kind arising from the use of this data sheet.
  • Page 2: Normal Bake

    NORMAL BAKE During a normal bake mode, the control preheats the oven by alternate bake & broil elements. When the desired temperature is reached, the control adds top heat by cycling the broil element on for 6 to 9 seconds per minute .
  • Page 3 ELECTRONIC OVEN CONTROL FAULT CODE DESCRIPTIONS AND RTD SCALE Note: Only two fault codes are displayed by this control “F1”and “F3”. Generally, “F1” implies a control failure, and “F3” an oven probe problem. In all ocurrences the alarm is accompanied by a display of “F1” Fault Code Likely Failure Condition/Cause Shorted keypad.
  • Page 4 482.2 ± 7.6 Bake Broil Function Element Element Bake Broil Resistance (ohms) 1000 ± 4.0 1091 ± 5.3 1453 ± 8.9 1654 ± 10.8 1852 ± 13.5 2047 ± 15.8 2237 ± 18.5 2697 ± 24.4 (Electric Models) Oven Temperature Sensor...

Comments to this Manuals

Symbols: 0
Latest comments: