Panasonic EY75A8 Service Manual page 8

4.4. How to remove the Switch assembly, LED harness assembly and
Battery terminal.
Note: (when assembling)
The connect cover cannot be reused after being repaired.
NOTE:(When attaching the connectors/switch).
Apply grease (Permalub) to the indicated by the shaded area.
All manuals and user guides at all-guides.com
8
1. Remove the connector(6-pin/2-pin) covers.
2. Disconnect the connecters or lead wires in order to (1) to (4).
Note:
Exercise care not to bend the terminal fitting.