Advertisement
PLC Front Panel Display
The display has 4 lines text with the following information:
Line 1: Status
Run–CW
Run–CCW
Coast
Halt
Going Home
Press 'B' to Resume The fixture will resume operation after finding home
Line 2:
Displays the number of 200ms ticks since passing home.
Tick #
Timeout
Line 3:
Displays the speed setting for the fixture
Speed #
Line 4:
Displays the +/- rotation in degrees. A value of +/-90 will rotate 90
and right of home for a total of 180
Rotation Deg+/-#
PLC Front Panel Buttons
'A'
If pressed, the PLC instructs the fixture to go to the home position of 0 degrees.
Line 1 status displays "Going Home"
'B'
Will tell the PLC to resume normal operation from a "Going Home" condition.
Line 1 status displays "Press 'B' to Resume"
Displays the running status of the fixture
Fixture is running in a clockwise direction
Fixture is running in a counter clockwise direction
Fixture is coasting (motor is temporarily not running)
Fixture is stopped due to a HALT button press.
The fixture is going to the home position
# = 0 - 200
Indicates the WatchDog timer has expired. See "Timeout Conditon"
# = 0 - 50
# = 1 - 90
o
.
o
to the left
Page 3 of 4
Advertisement
