Fan And Fan Motor - Mitsubishi Electric City Multi PEFY-M20VMA-A Technical & Service Manual

[ VIII Disassembly Procedure ]

6. Fan and fan motor

Exercise caution when removing heavy parts.
1. Removing the filter and the bottom plate
(1) Push down the tab on the filter, and pull out the filter in the
direction of the arrow 1.
(2) Remove the fixing screws on the bottom plate (M) to re-
move it.
2. Removing the fan casing (bottom half)
(1) Squeeze the tabs on the fan casing to remove it in the di-
rection of arrow 2.
3. Removing the motor cable
(1) Remove the motor cable threw the rubber bush.
4. Removing the fan motor and the Sirocco fan
(1) Loosen either of the two rubber joint (N) fixing screws.
(2) To remove the Sirocco fans (b) and (c) of PEFY-M100/
125/140VMA(L)-A, PEFY-M100/125VMA2-A, loosen
only the screw (d) on the bearing support (P), and re-
move the other screws on it.
(3) Remove the two motor fixing screws to remove the motor
and the Sirocco fan in the direction of arrow 3.
HWE19070
1
Fig.9
Fig.10
(a) Tab
(b)
(N)
Fig.11
Fig.12
- 37 -
1
(M)
(a)
2
(d) (c)
(P)
3
GB