Midea MAC-215F User Manual page 7

OSC: Press this button, the air direction oscillates automatically on a horizontal basis, and
meanwhile the air direction indicator illuminates; press this button again to cancel this
function; by operating the horizontal blades manually, you can choose air direction up and
down.
SPEED:press this button, the start cooling fan is in high-level runningcondition; if the
button is pressed continuously, the air speed will switch in the following manner:
PRO/TIMER:
Timing shutdown function：
When the air cooler is in working condition, press TIMER button, then the timing shutdown
function is on. Time setting is from 1 hour to 7 hours. Add up of all three pilots 1H, 2H, 4H
means time setting, if those three pilots are closed which means Timing shutdown function
is off. Time setting will start from 1H—2H—3H......7H —Timing shutdown function off and
repeat. Timer indicator always show rest time from setting.
Progam power on function:
When unit is on "standby" , press TIME button, then progam power on function is on. Time
setting is from 1hour to 7 hours. Add up of all three pilots 1H, 2H, 4H means time setting, if
those three pilots are closed which means progam power on function is off. Time setting will
start from 1H—2H—3H......7H — progam power on function off and repeat. Timer indicator
always show rest time from setting.
STYLE: Press this button , the run mode will vary according to the following order:
ION: Press this button , the function of Anion is turned on. Press the button again, this
function is turned off.
EVA/COOLER : Press this button , the function of Humidifying is turned on, press the
button again, this function is turned off.
Remote Controller
1. Open the remote controller rear cover and set a CR2032
battery; then the remoter control can be used. It has the
same button with the control board.
2. The effective distance for the remote controller is 6 meter.
Low Medium
High
Natural
Sleep Normal
SPEED ON/OFF
ION
EVAPORATOR
OSC. TIMER
STYLE