Honeycomb Filter Frame
Wheels
1. Unfold the package and take out the air cooler,put it on the ground.
2. Check out the spare part.
3. Install the universal wheel: take out the universal wheel and install it on the air cooler.
4. Add water:
Fill in water tank form bottom: hold filter support's handle, rotate to outside till seperate
filter support from unit (FIG 1), when water tank spotted, fill in water (FIG 2).
Add water from top: rotate water tank's top cover, fill in water (FIG 1).
Ice box placed in the foam inside box.
Attention
Pay attention to the Water line when watering. (Fig.3)
When watering, the water must not be higher than the "MAX" water line.
When humidifying, the water must not be lower than the "MIN" water line.
Structural Diagram
Water tank 2
Water tank 1
Control panel
Air outlet
Perfume box
Installation and Use
Ice box
Remote control