General Safety Rules - Bosch GPL100-30G Operating/Safety Instructions Manual

hazardous radiation exposure, electric shock, fire and/or serious
injury. The term "tool" in all of the warnings listed below refers to your
mains-operated (corded) tool or battery-operated (cordless) tool.
y o u r l a s e r t o o l f o r y o u r
convenience and safety. They
indicate where the laser light is
emitted by the tool. ALWAYS BE
AWARE of their location when
using the tool.
May 8, 2019. This can lead to persons being blinded.
DO NOT remove or deface any warning or caution labels.
Removing labels increases the risk of exposure to laser radiation.
Use of controls or adjustments or performance of procedures
other than those specified in this manual, may result in hazardous
radiation exposure.
ALWAYS make sure that any bystanders in the vicinity of use
are made aware of the dangers of looking directly into the laser
tool.
DO NOT place the laser tool in a position that may cause
GPL100-30G 50G 11-20.indd 7

General Safety Rules

Read all instructions. Failure to follow all
instructions listed below may result in
The following
labels are on
Do not direct the laser beam at persons or
animals and do not stare into the laser beam
yourself. This tool produces laser class 2 laser
radiation and complies with 21 CFR 1040.10 and
1040.11 except for conformance with IEC 60825-1
Ed. 3., as described in Laser Notice No. 56, dated
-7-
4/23/21 5:27 PM