Advertisement
6. Seal the exhaust valve
•
Turn the exhaust valve closed to create pressure. For manual exhaust, turn it to the
exhaust positinon.
•
Ensure the floater valve drops down before turning on.
Sealing schematic diagram
Function Selection
1.
Turn on. If the buttons are inoperable, check the lid is closed properly.
2.
Select the required function: press the function button to select function and press
the "+"/"-" button to adjust the cooking time.
3.
Press one function button, 10 seconds later or press the "Start" button, the electric
pressure cooker starts to select the program of corresponding function. 10 seconds
after selecting the function, the electric pressure cooker starts working.
4.
After cooking, the cooker may automatically enter into the keep warm state. After
cooking, the indicator of corresponding function lights off, the keep warm indicator
lights on, the cooker makes sound and enters into the keep warm state. Under the
standby state, press the "Keep Warm" button, 10 seconds later or press the "Start"
button, the keep warm and start indicator lights on, the cooker makes sound and
enters into the keep warm state.
Tips:
•
Under any state, press the "Cancel" button to cancel the current operation state
and return to standby state.
•
A low clunking sound is normal during operation
•
When cooking a small amount of food, the inner pot may be lifted when opening
the lid: shake it gently to detach.
Opening the Lid
Turn off or remove power plug. Then, to Quickly open the lid (solid food only):
Turn the exhaust valve to the exhaust position until the float valve drops down.
To open the lid normally (recommended)
Allow the electric pressure cooker to cool until the float valve drops down.
Exhaust schematic diagram
Advertisement
