Tilt Adjustment - Stern Pinball JURASSIC PARK Setup Manual

TILT ADJUSTMENT

1 LOCATE THE TILT SENSOR
INSIDE THE FRONT DOOR
BY THE LEFT SIDE PANEL.
2 REMOVE ANY SHIPPING
MATERIAL COVERING THE
TILT SENSOR.
3 SENSITIVITY OF THE TILT
HAS BEEN FACTORY
ADJUSTED. IF FURTHER
ADJUSTMENT IS REQUIRED,
LOOSEN THUMB SCREW,
ADJUST THE PLUMB BOB,
AND RETIGHTEN.
NOTE: THE VERTICAL
POSITION OF THE PLUMB
BOB AFFECTS TILT
SENSITIVITY - HIGHER
MAKES THE GAME MORE
SENSITIVE TO TILTING.
INITIALIZATION
LEVELING
ADJUST THE FRONT
1
OR REAR LEVELERS AS
NECESSARY TO POSITION
THE PLAYFIELD BUBBLE
LEVEL, LOCATED ON THE
FRONT RIGHT OF THE
PLAYFIELD NEXT TO THE
SHOOTER LANE, TO FLOAT
BETWEEN THE TWO (2)
BLACK LINES. THIS WILL
PLACE THE PLAYFIELD AT
THE RECOMMENDED 6.5°
PITCH.
2
USE A PINBALL TO ROLL
DOWN THE CENTER OF
THE PLAYFIELD FOR SIDE-
TO-SIDE LEVELING, OR
USE AN EXTERNAL BUBBLE
LEVEL, DIGITAL LEVEL, OR
SMARTPHONE LEVEL APP.
ATTACH THE POWERLINE
CORD TO THE BACK
OF THE GAME ON THE
BACKBOX AND PLUG THE
CORD INTO A 3-PRONG
POWER OUTLET
FLIP THE POWER
SWITCH LOCATED ON
THE UNDERSIDE OF THE
RIGHT EDGE OF THE
BACKBOX TO POWER ON
THE GAME
9