Instructions For Continued Airworthiness; Introduction - Garmin 400W Series Manual

2. INSTRUCTIONS FOR CONTINUED AIRWORTHINESS

2.1 Introduction

Content, Scope, Purpose and Arrangement:
Applicability:
Definition of Abbreviations:
Precautions:
Units of measurement:
Referenced publications:
Additional Maintenance Data:
Retention:
400W Series
Instructions for Continued Airworthiness Bell 206B
This document identifies the Instructions for
Continued Airworthiness for the modification of the
rotorcraft by installation of the Garmin 400W Series
GPS/WAAS Nav/Com units.
Applies to Bell models 206B rotorcraft altered by
installation of the Garmin 400W Series GPS/WAAS
Nav/Com units.
See Section 1.5
None
None
Garmin 005-00610-03 Rev. 1 "Equipment List
400W/500W Series Installation Bell 206B STC" or
later FAA Approved Revisions
Garmin 190-01226-02 Rev. 1 "400W Series
Rotorcraft STC Installation Manual" or later FAA
Approved Revisions
Garmin 190-01226-07 Rev. 3 "400W/500W Series
Installation Bell 206B" or later FAA Approved
Revisions
Garmin 005-W0223-00 Rev. 3 "400W/500W Series
Harness Assembly Bell 206B" or later FAA
Approved Revisions
This document, or the information contained within,
will be included in the rotorcraft's permanent
records.
190-01226-04 Rev. 2
Page 4 of 22