Miele KM 7678 FR Operating And Installation Instructions page 20

Before using for the first time
Setting up Miele@home
Connecting via the app
The Miele app can be used to connect
to your network.
 Install the Miele app on your mobile
device.
To connect, you will need:
1. Your WiFi network password
2. The password for your hob
The password for your hob consists of
the last 9 digits of the serial number.
This can be found on the appliance's
data plate.
 Switch the hob on.
 Place an induction-compatible item
of cookware on the hob.
 Start the Miele app.
 Touch and hold the 0 and 5 sensor
controls on the numerical display at
the same time for 6 seconds.
The seconds can be seen counting
down in the timer display. After the time
has elapsed, the code : is displayed
in the timer display for 10 seconds.
You now have 10 minutes to configure
the WiFi.
 Follow the user navigation in the app.
20
Connecting via WPS
Prerequisite: you must have a WPS
(WiFi protected setup) compatible
router.
 Switch the hob on.
 Place an induction-compatible item
of cookware on the hob.
 Touch and hold the 0 and 6 sensor
controls on the numerical display at
the same time for 6 seconds.
The seconds can be seen counting
down in the timer display. After the time
has elapsed, a progress light appears in
the timer display during the connection
attempt (for max. 120 seconds).
The WPS login is only active during
these 120 seconds.
 Activate the WPS function on your
WiFi router.
If the connection was successful, the
code : appears in the timer display.
If the connection could not be estab-
lished, the timer display will show the
code :. You have probably not activ-
ated WPS on your router quickly
enough. Repeat the steps above.
Tip: If your WiFi router does not support
WPS, please connect via the Miele app.