Fisher-Price Big Action Garage Instructions Manual page 7

Tab
Upper
Hole
Recess
• Insert the tab on the end of the starting gate into the hole in the
top of the speed ramp.
• Lower the starting gate into the recess on the speed ramp.
• Insert the starting gate pin through the side of the speed
ramp and into the starting gate as shown. Make sure that the
hook on the end of the starting gate pin is upward.
• Rotate the starting gate pin to lower the starting gate.
Top Floor
Base
• Slide and firmly snap the speed ramp onto the tabs on the top
floor.
• Insert and firmly snap the tabs on the bottom of the speed
ramp into the slots on the base.
• Pull up on the speed ramp to make sure it is secured to the top
floor and base.
Starting Gate
Hook
Starting Gate Pin
Tabs
Slots
Front View
Drawer
Guide
Side
Rail
Storage Drawer
• Position the Big Action Garage so that the back of the garage
faces you.
• Align the side rails on the storage drawer with the drawer guides
on the underside of the center floor.
• Slide the storage drawer underneath the center floor.
Features
Elevator
Speed
Ramp
Tabs
• Drive a vehicle onto the elevator platform and raise or lower the
elevator to any of the four levels. The elevator gates will auto-
matically open to let you drive through!
7
Center Floor
Back View
Drawer
Guide
Side Rail
Elevator
Platform