Campbell Hausfeld IN730600AV Easy Setup Manual

3/8 inch Stapler
CHN71600
3
Load fasteners. See manual for further information regarding
length and type of fasteners.
Press magazine latch button Press magazine latch button
and pull magazine open. and pull magazine open.
Setup Like a Pro
Visit us at chpower.com
Setup Like a Pro
Easy Setup Guide
Projects are easier with
Campbell Hausfeld products.
Thank you for deciding to purchase a Campbell
Hausfeld product. We are dedicated to providing
tools that help you to complete your projects
Like a Pro.
© 2010 Campbell Hausfeld/Scott Fetzer
Load staples into the
magazine as shown.
1
Close
regulator,
compressor and
Allow
maximum pressure.
NOTICE: To operate this tool you will need
at least a 1 gallon compressor.
IN730600AV 2/10
Close magazine.
2
pressure Attach
Turn ON to regulator outlet.
Adjust
tank to reach knob so outlet
pressure is between
60 psi and 100 psi.
4
Attach
airhose to nailer inlet.
CHN71600 — Air Powered Stapler
air hose
regulator
100
60
psi
psi
coupler on