Local Configuration; Local Config; Overload Settings; Alarm View Settings - Motorola MVMS User Manual

MVMS Management Server User Manual

11 Local Configuration

11.1 Local Config

Go to HomeLocal ConfigurationSystem Startup and Maintenance.
Auto Login: if enabled the system will automatically log in when running this software next time.
Auto Startup: if enabled, the system will automatically start when the computer starts.
Show tips when the node is offline: if enabled, the system will pop up tips when there is node offline.
Trigger audio when the node is offline: if enabled, the system will trigger audio when there is node offline.
Full name display for DVR/NVR's channels: if enabled, the DVR/NVR's channel name listed in the resource tree will show the
DVR/NVR name and the channel name. If disabled, only the channel name is shown.
Verify the password before exiting the program: if enabled, you shall enter the password before exiting the program.
In this interface, you also can select the resource tree sorting rules, video configuration rules, language and upload the various alarm audio
files. You can click [Synchronize platform time] to synchronize the time of all devices and the platform.

11.2 Overload Settings

This system supports CPU and memory overload protection. When the system overloads, the monitor client will restrict the new live view
and playback operation and the overload tip will prompt. Go to HomeLocal ConfigurationOverload Setting. Select the overload upper
limit and then click [Apply] to save the settings.

11.3 Alarm View Settings

Go to HomeLocal ConfigurationAlarm View Setting.
55