MVMS Management Server User Manual
6
Alarm Management
6.1 Alarm Server Configuration
Alarm server is in charge of receiving and recording alarm information of connected devices and then sending the alarm information to the
relevant user terminal system or devices in accordance with prior alarm settings. There is a default alarm server.
Go to HomeAdd, Edit or Delete Device Alarm Server interface to view the online status of the alarm server. If it is not online, please
check its network connection.
Click
to modify the added alarm server; click
to delete the added alarm server.
6.2 Alarm Configuration
① Go to HomeDevice Setting interface.
Select the desired device to enable alarms (refer to the user manual of the corresponding device for the detailed settings).
② Go to HomeAlarm CenterAlarm Linkage interface.
Select area, alarm type and then enable alarm linkages.
All ON: enable all alarm linkages of the current alarm type and area (schedule excluded).
29