Alarm View - Motorola MVMS User Manual

MVMS Management Server User Manual
After the alarm is processed, the alarm handling status and disposition will be shown as below.
If you create more than one SOP, you can designate the SOP for the added encoding devices. Go to HomeResource ManagementAdd,
Edit or Delete DeviceEncoding Device interface. Then click [Select SOP] to select the SOP and encoding devices.
Select the SOP. Then check the desired device and click to select it. Finally, click [OK] to save the settings.
After that, you can choose the corresponding SOP action when you handle the alarm of the camera.

6.4 Alarm View

Having set the alarm preview linkage, the alarm view window will prompt when an alarm is triggered.
31