Exit Settings; Recover Default Settings - Key-Disp KD716 User Manual

one by one until the new 4-digit password is completed.
To store the new power-on password, hold i button for 2 s and then exit settings.
When you switch the E-bike system on next time, the display will show P1, 0000, please input the new
password to power on.
◆Exit the settings
In settings interface, press i button(less than 2 s) is to confirm the input and save current settings while holding
i button (more than 2 s) is to store the settings and exit the current setting. Holding the DOWN button (more than 2
s) is to cancel the operations but not to store settings data and exit the settings.
■If there is no operations in one minute, the display will exit settings interface automatically.

Recover default settings

dEF represents recovering default settings. The default value is N.
To access recover default settings, hold both UP and i button for 2s and then access selection interface, to
press the UP/DOWN button to choose "Y" or "N". "N" means not recovering default settings. Y means recovering
default settings. When it is "Y", hold i button for 2s to recover default settings, the display shows DEF-00 at the
same time and returns to display start-up
Password change interface
interface.
Recover default settings
18