Unit Conversion Km/Miles; General Parameters Settings; Wheel Diameter - Key-Disp KD716 User Manual

◆Unit conversion KM/Miles

U represents unit settings, "1" is mile and "2" is kilometer. The default value is "2".
To convert unit, press the UP/DOWN button to increase or decrease until the desired unit is displayed.
Press the i button to store a changed setting and then access trip distance clearance settings again or long press
the i button for 2s and exit general settings
General Parameter Settings
To access general parameter settings interface, hold both the UP and the DOWN button simultaneously for
2s to enter general settings and hold both the DOWN and i button for 2s to enter General Parameter Settings.
◆Wheel Diameter Settings
Ld represents wheel diameter settings. Optional values are 16, 18, 20, 22, 24, 26, 700C and 28. The default
value is 26 inch.
Press the UP/DOWN button to increase or decrease wheel diameter until the desired value is displayed.
Press i button to store a changed setting and access speed-limit settings interface.
Miles and KM conversion interface.
9