Panasonic EH-XT30 Operating Instructions Manual page 11

Select the desired ion level and temperature according
to the skin condition and personal preference.
• For the first use or if any skin discomfort occurs, it is
Ion level /
Temperature
• The PRECARE/COOLING modes do not have the
Before use, remove earrings or any other jewellery from
Accessories
the face or around the neck.
Hold the main body tightly so that
your palm fully comes into contact
with the ion inductive panel on its
back. When the IONIC head senses
the contact with the skin, it will
automatically vibrate.
• While the IONIC head is vibrating,
Skin detection
function /
vibration of the
IONIC head
• If the IONIC head does not vibrate, there is no ion
• Skin detection and vibration are not available during
• The appliance will automatically turn off if you do not
The PRECARE head starts vibrating once it comes in full
Vibration of the
contact with the skin firmly.
PRECARE
• While the PRECARE head is vibrating, none of the
head
• The appliance will automatically turn off if you
recommended to set the ion level to "LOW" and the
temperature to "LOW" before use.
adjustment functions for the ion and temperature level.
(The ion level and temperature cannot be selected.)
none of the switches is available.
There may be a slight noise, which
is not a malfunction.
effect.
AUTO mode cooling or COOLING mode. (Only cooling
for the IONIC head)
touch the ion inductive panel or apply the IONIC head
to the skin for approximately 20 seconds.
(Except during AUTO mode cooling or COOLING
mode)
switches is available. There may be a slight noise,
which is not a malfunction.
do not apply the PRECARE head to the skin for
approximately 20 seconds.
Ion
inductive
panel
11