Save/Cancel Barcodes - Renkforce 7A Series User Manual

** Enter Setup

Save/Cancel Barcodes

After reading numeric barcode(s), you need to scan the Save barcode to save the data. If you scan the
wrong digit(s), you can either scan the Cancel the Last Digit barcode and then the correct digit, or scan
the Cancel All Digits barcode and then the digits you want.
For instance, after reading the Decode Session Timeout barcode and numeric barcodes "1", "2" and "3",
you scan:
Cancel the Last Digit: The last digit "3" will be removed.
Cancel All Digits: All digits "123" will be removed.
Save Cancel the Last Digit
Cancel All Digits