Check Digit Verification - Renkforce 7A Series User Manual

** Enter Setup

Check Digit Verification

Check digits are optional for Code 93 and can be added as the last two digits, which are calculated values
used to verify the integrity of the data.
Disable: The engine transmits Code 93 barcodes as is.
Do Not Transmit Check Digit After Verification: The engine checks the integrity of all Code 93
barcodes to verify that the data complies with the check digit algorithm. Barcodes passing the checks will
be transmitted except the last two digits, whereas those failing them will not be transmitted.
Transmit Check Digit After Verification: The engine checks the integrity of all Code 93 barcodes to
verify that the data complies with the check digit algorithm. Barcodes passing the checks will be
transmitted, whereas those failing them will not be transmitted.
Disable
** Do Not Transmit Check Digit After Verification Transmit Check Digit After Verification
57 Exit Setup