Set Length Range For Interleaved 2 Of 5 - Renkforce 7A Series User Manual

Set Length Range for Interleaved 2 of 5

The engine can be configured to only decode Interleaved 2 of 5 barcodes with lengths that fall between
(inclusive) the minimum and maximum lengths.
The supported maximum length is 255 characters. If minimum length is set to be greater than maximum
length, the engine only decodes Interleaved 2 of 5 barcodes with either the minimum or maximum length.
If minimum length is same as maximum length, only Interleaved 2 of 5 barcodes with that length are to be
decoded.
Set the Minimum Length
Example: Set the engine to decode Interleaved 2 of 5 barcodes containing between 8 and 12
characters
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode "8". (See the Digit Barcodes section in Appendix)
4. Scan the Save barcode. (See the Save/Cancel Barcodes section in Appendix)
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcodes "1" and "2".
7. Scan the Save barcode.
8. Scan the Exit Setup barcode.
39
** Enter Setup
Set the Maximum Length
Exit Setup