Advertisement
INSTRUCTIONS ARE LISTED IN NUMERICAL ORDER. USE AIR PURIFIER
Pre-Operating Instructions
1.
Pre-Operating Instructions
2.
Carefully remove your air purifier from the gift box and the bag.
3.
Remove the back cover and remove the filter from the bag.
4.
Select a firm, level and flat location. For proper air flow, locate the unit at least 1
foot (0.3 M) from any wall or furniture. Ensure no grilles are blocked.
5.
Plug the power cord into a 120V AC outlet.
Operating Instructions
The air purifier is operated by the manual controls located on the top of the air
purifier (as shown in Unit Top View).
1.
Plug the air purifier into a 120V AC outlet.
2.
Turn the air purifier on by pressing On/Off Button.
3.
Upon turning the air purifier on, the power indicator will be lit, the unit will be at
the High fan speed, and the ionizer will start to work.
4.
Pressing Fan Speed Button, at this point will set the air purifier into Medium fan
speed.
5.
Pressing Fan Speed Button again will set the air purifier into Low fan speed.
6.
Pressing Fan Speed Button once more will set the air purifier back to High fan
speed.
7.
To turn the air purifier off, press the On/Off Button.
COUNTDOWN NEGATIVE ION/ION FUNCTION:
When pressing the Ionizer Button to start it, the Ion icon will light on the LCD display.
To turn the ionizer off, press Ionizer Button.
UV LAMP FUNCTION:
The UV-C germicidal lamp can kill harmful airborne bacteria and viruses. This function
will work in any mode. Press the UV Button to start the UV lamp and stop the UV lamp
by pressing the UV Button again.
UV LAMP RESET FUNCTION:
If the UV lamp needs to be replaced, the UV icon on the LCD will illuminate and flicker.
After replacing the UV lamp, reset the UV lamp by pressing the UV Button for a few
seconds, the UV icon will stop flickering and the new UV lamp will start to work. Check
from the UV View Window, if the UV lamp still lights, it should not be replaced.
HEPA RESET FUNCTION:
If the HEPA filter needs to be cleaned, the HEPA Reset icon on the LCD will illuminate
and flicker. After cleaning the HEPA filter, RESET the HEPA filter by using a pin or
paperclip to press the HEPA RESET Button, then the icon will stop flickering. For
instruction on how to clean the HEPA filter see page 10.
H O W T O U S E
OVERVIEW PAGE FOR REFERENCE.
08
Advertisement
