Advertisement
Know Your Air Purifier:
Pre-filter+Hepa filter
Front case
Functions:
1. Washable pre-filter to capture large particles such as dust.
2. HEPA filter to remove microscopic particles down to 0.3 microns
in size such as fine dust, smoke, pollen, bacteria and mold.
3. Low level and ozone safe negative ionizer to freshen and
balance the air(ie neutralize a surplus of positive charges from
Tv s and computer monitors).
4. Three fan speed settings with mechanical rotary control.
Main unit
Ionizer
Operating Instructions:
Easy operating instructions:
1.Plug it in
2.Turn it on (turn the knob to select your fan speed)
3.Breathe easier
Note: If the air purifier does not turn on when the knob is turned
check to make sure:
1.You have power to your electrical outlet.
2.The filter is installed and the front cover of the air purifier
is correctly installed. There is a safety mechanism that
prevents the air purifier from powering on if the either the
filter or cover are not properly installed.
Assembly and Maintenance:
1.The washable pre-filter can be separated from the HEPA filter
and cleaned with water or a low level suction vacuum cleaner.
This is suggested every couple months if you have pet hair or
above average dust levels.
2.The HEPA filter cannot be washed and the media in the filter will
be damaged if it becomes wet.
3. If the air purifier begins to make a noise like the motor is straining
due to increased air flow resistance it is best to replace the HEPA
filter since the air flow through the air purifier is being greatly
reduced.
Advertisement
